Custom Search
TM 55-1905-221-14-4
6-39. REVERSE GEAR ASSEMBLY (Continued).
f. Lubricate the periphery of
the oil transfer sleeve (43)
with engine oil.
g. Start the oil transfer sleeve
(43) straight into the bore
of the gear housing (19).
Then, place a wood block on
top of the sleeve and under
the ram of the press.
h. Bring the ram of the press
down on the wood block and
press the sleeve (43) straight
into the gear housing (19)
until the flange on the
sleeve contacts the housing.
i. Remove the reverse gear
housing (19) from the
hydraulic press and support
the housing (forward face
down) on wood blocks approxi-
mately 6" high.


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business