Custom Search
TM 55-1905-221-14-4
6-39. REVERSE GEAR ASSEMBLY (Continued).
l. With the reverse gear
housing (19) resting on
the wood blocks, insert
the forward end of the
reverse gear drive shaft
(6) through the opening
in the aft side of the
gear housing and start
it straight into the oil
transfer sleeve (43).
Lower the drive shaft
(6) through the oil
transfer sleeve (43)
until the first oil seal
ring (39) contacts
the oil transfer sleeve
(43). Carefully work
the shaft through the
sleeve until all
three seal rings are
piloted into the sleeve
and the thrust washer
(40) bears against the
sleeve and gear housing.
Use care when installing the reverse gear drive shaft (6) to avoid breaking the oil seal rings (39).


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business