| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-10
Table 2-2. Operator/Crew Preventive Maintenance Checks and Service - CONT
B - Before
D - During
A - After
W - Weekly
M - Monthly
INTERVAL
PROCEDURES
EQUIPMENT IS
ITEM
ITEM TO BE
CHECK FOR AND HAVE REPAIRED
NOT READY/
NO
B
DA W M
INSPECTED
OR ADJUST AS NECESSARY
AVAILABLE IF:
87
Ship's Service
Diesel Generator
(Port) -
continued
Intake Air
a.
Check all air connections
System
for loose clamps or
connections, and tighten as
required.
b.
Check all hoses and tubing
for cracks, punctures, and
tears, and replace as
required.
c.
Check for collapsing hoses
or tubing and other damage
and replace as required.
Oil Pressure
Check gauge for normal reading
(20-70 psi).
Engine Idle
Tachometer should read 725-775
Speed
RPM.
Oil Temperature
Check gauge for normal reading
(125195 ).
-
F
Water
Check gauge for normal reading
Temperature
(160203 ).
-
F
Battery
Check gauge for normal reading
(22-28V).
Throttle
Check for binding, loose
(Actuator)
fittings, and capscrews that
affect the smooth operation of
the throttle throughout its
range. Refer defects to unit
maintenance.
Exhaust System
a.
Check for exhaust leaks.
Exhaust system
Refer leaks to unit
leaks.
maintenance.
b.
Check for corrosion and
clean as required.
Generator
Make sure that air intakes and
vents on the generator housing
are free from dirt, debris, and
other foreign materials.
2-260
|
||
|
||
