| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-10
(6) Engage dog lug on MAIN SPOOL (1, FIGURE 2-184) as follows:
(a) Turn HAUL BACK-PAY OUT switch (3, FIGURE 2-183) to allow MAIN SPOOL (1, FIGURE 2-184) to
creep until dog lug will enter the spool flange.
(b) Pull DOG LEVER (3) forward, setting dog.
(7) On Stern Anchor Winch (FIGURE 2-184) turn BRAKE HANDWHEEL (2) clockwise to set brake.
(8) Release CLUTCH LEVER (4).
NOTE
If clutch does not release, jog drive gently by moving HAUL BACK-PAY OUT switch (3, FIGURE 2-183) to pay
out, and quickly release it. This allows the clutch to release.
c. Lowering Anchor by Releasing Brake Handwhee.
l
WARNING
Before operating stern anchor winch, ensure personnel and foreign objects are
clear of wire rope drum, wire rope, and related components. Moving winch, wire
rope and gypsies can cause serious injury or death.
Keep all personnel clear of winch and wire rope while in operation.
Keep all personnel clear of moving and rotating parts of winch.
Do not attempt to perform any maintenance or repairs while winch is running
Do not operate this winch with guards removed.
Do not operate hydraulic motor with brake engaged.
Wear life jacket and use safety line when removing turnbuckle from anchor to
prevent injury from propellers in the event of falling overboard.
(1) Place winch in standby condition as follows:
(a)
On Stern Anchor Winch (FIGURE 2-184) ensure BRAKE HANDWHEEL (2) is set.
(b)
Engage DOG LEVER (3).
(c)
Engage CLUTCH LEVER (4).
|
||
|
||
