| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-10
d. Hauling In Anchor.
WARNING
Before operating stern anchor winch, ensure personnel and foreign objects are
clear of wire rope drum, wire rope, and related components. Moving winch, wire
rope and gypsies can cause serious injury or death.
Keep all personnel clear of winch and wire rope while in operation.
Keep all personnel clear of moving and rotating parts of winch.
Do not attempt to perform any maintenance or repairs while winch is running
Do not operate this winch with guards removed.
Do not operate hydraulic motor with brake engaged.
(1) On Stern Anchor Winch (FIGURE 2-184) engage CLUTCH LEVER (4).
NOTE
If clutch does not engage, jog drive gently by turning HAUL BACK-PAY OUT
switch to HAUL BACK, and then quickly release it. This allows the clutch to
engage.
(2) Lock CLUTCH LEVER (4) in engaged position.
(3) Disengage DOG LEVER (3) as follows:
(a) Slowly turn BRAKE HANDWHEEL (2) counterclockwise to release brake.
(b) Slowly move HAUL BACK-PAY OUT switch (3, FIGURE 2-183) to HAUL BACK position until dog lug
is free in MAIN SPOOL (1, FIGURE 2-184).
(c) Push DOG LEVER (3) aft until dog is-away from MAIN SPOOL (1).
(4) On Stern Control Box (FIGURE 2-183), turn HAUL BACK-PAY OUT switch (3) counterclockwise to
HAUL BACK position and haul in anchor.
(5) Release HAUL BACK-PAY OUT switch (3).
(6) Engage dog lug on MAIN SPOOL (I, FIGURE 2-184) as follows:
(a) Turn HAUL BACK-PAY OUT switch (3, FIGURE 2-183) to allow MAIN SPOOL (1, FIGURE 2-184) to
creep until dog lug will enter the spool flange.
(b) Pull DOG LEVER (3) forward to set DOG. Ensure DOG can not be removed from main spool
without aid of the HAUL BACK - PAYOUT switch. Pull DOG LEVER (3) forward, setting dog.
(7) Turn BRAKE HANDWHEEL (2) clockwise to set brake.
(8) Attach ANCHOR HOLDBACK turnbuckle (1, FIGURE 2-185).
Change 2
2-519
|
||
|
||
