| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-15
ASSEMBLY
a. Install the preformed packings (14, 15, 16, and 17).
b. Replace the spring (7) and spring retainer (6) on the shaft (9).
c. Replace the shaft into the housing (4). Replace gasket (5).
d. Replace the torque pins (8).
e. Replace the ball bearing (3) on the body end of the shaft.
NOTE
Ensure beveled edge of encased seal is replaced in same direction as noted in DISASSEMBLY.
f. Install encased seal (1).
g. Replace the retaining ring (2) on the body end of the shaft.
h. Replace the following components into the piston assembly (24):
(1) Piston (13).
(2) Six stationary discs (12).
(3) Five friction lining (11).
(4) Primary disc (10).
i. Replace the piston assembly (24) on to the shaft.
j. Replace the following components on to the power plate:
(1) Bleeder valve (18).
(2) Safety relief valve (21).
(3) Housing plug (22).
k. Replace the power plate (23) on to the piston as follows:
(1) Secure the assembly in a shop vise.
4-28
|
||
|
||
