| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-16
(13) On stern control box, move control switch to neutral when wire rope travel through fairlead with roller swivel (2)
is completed.
d.Turnbuckle. (FIGURE 4-1)
(1)
Position turnbuckle (7) at pad eye (11).
(2)
Remove pin (8) and install shackle (9) through turnbuckle (7).
(3)
Position turnbuckle and shackle over pad eye (11).
(4)
Secure shackle (9) to pad eye (11) with shackle pin (8).
e. Fluked Marine Anchor. (FIGURE 4-1)
(1)
Lift anchor clear of dock or deck area.
(2)
Position anchor over storage area aft; then lower anchor until fluked end of anchor clears storage position;
then raise to the storage position.
(3)
Position turnbuckle (7) at eye on anchor (10).
(4)
Remove pin (5) and install shackle (6) through turnbuckle (7).
(5)
Position turnbuckle and shackle eye mounting eye on anchor.
(6)
Secure shackle (6) to anchor with shackle pin (5).
(7)
Tighten turnbuckle.
(8)
Remove lifting device and sling.
f.
Shackle, Single Leg Wire Rope Assembly. (FIGURE 4-1)
(1)
Remove pin (15) from shackle (14).
(2)
Install shackle (14) through swivel section of swivel and link assembly (13).
(3)
Position swivel and link assembly (13) and shackle (14) on single leg wire rope assembly (16).
(4)
Secure shackle (14) to single leg wire rope assembly (16) with shackle pin (15).
g.Detachable Chain Link. (FIGURE 4-1)
(1)
Connect anchor (10) and link section of swivel and link assembly (13) with detachable chain link body (17).
(2)
Attach lugs (18) to detachable chain link body (17).
(3)
Drive tapered forelock pin (19) into detachable chain link body with a hammer.
4-14
|
||
|
||
