FIGURE 3-23. Plate Assembly

Custom Search

FIGURE 3-22. Plate Assembly Removal.

TM-55-1905-223-24-18-2 Landing Craft Utility (LCU) NSN 1905-01-154-1191 Basic Craft Part II Manual

Replace Vessel Subassembly (Third Stage)

TM 55-1905-223-24-18-2

FIGURE 3-23. Plate Assembly.

ASSEMBLY

a. Install five sleeve spacers (6) at bottom of five threaded rod ends (2).

b. Alternately install ten elliptical plates, one at a time, with five sleeve spacers (5) on threaded rod ends

(2).

c. Install five sleeve spacers (6) on threaded rod ends at top of plate assembly.

d. Install five flat washers (3) and self-locking wing nuts (1) on five threaded rod ends.

REPLACEMENT

a. Carefully lift and position plate assembly (1) into bottom of vessel (2, Figure 3-22).

b. Baffles and vessel cover replaced as specified in paragraph 3-25 .

3-107