Replace Vessel Subassembly (Third Stage)

Custom Search

FIGURE 3-23. Plate Assembly

TM-55-1905-223-24-18-2 Landing Craft Utility (LCU) NSN 1905-01-154-1191 Basic Craft Part II Manual

FIGURE 3-24. Vessel Subassembly (Third Stage)

TM 55-1905-223-24-18-2

3-27. Replace Vessel Subassembly (Third Stage).(Figure 3-24)

This task covers:

a. Removal,

b. Replacement.

INITIAL SETUP

Tools

Equipment Condition

Tool kit, general mechanic's,

Drain vessel (third stage) as specified

in paragraph 2-29 .

Materials/Parts

Vessel P/N 1334-4

REMOVAL

a. Ensure vessel is firmly secured for removal.

b. Remove four hex plain nuts (3) lockwashers (2) and machine bolts (1) securing mounting skid.

c. Remove third stage vessel.

NOTE

Disconnect piping system from vessel. Plug/cap all fittings and openings.

REPLACEMENT

a. Carefully position third stage vessel on mounting skid with mounting bolt holes aligned.

Install four machine bolts (1), lockwashers (2) and hex plain nuts (3).

There are no torque

requirements.

NOTE

Unplug/cap all fittings and openings. Connect piping system to vessel.

c. Restore normal operation as specified in paragraph 2-29 .

3-108