| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-2
ASSEMBLY
a. Assemble the clutch assembly.
(1) Install locking plate (2) to bearing (1) with machine screws (3).
(2) Install bearing (1) on the pinion shaft (4) using hydraulic press. Install spring tension clip (44) using snap ring
pliers.
(3) Install clutch carrier (38) to clutch casing (36) with screws (45).
(4) Install bearing (41) on to clutch carrier (38) using hydraulic press. Install spring tension clip (42) using snap
ring pliers.
(5) Install ring (43) and clutch carrier (38) with bearing (41) and clutch casing (36) on the pinion shaft (4).
(6) Install screws (39) through locking plate (40).
(7) Install carrier (35) to pinion (4) with screws (37).
(8) Install discs (33 and 34) alternately into the clutch casing (36) over the carrier (35).
NOTE
There are a total of 12 outside discs and 11 inside discs.
(9) Install annular piston (32) in the clutch casing with retaining rings (31).
b. Install the clutch assembly onto shaft (20).
c.
Replace clutch cover. Refer to paragraph 4-9 for clutch cover replacement procedures.
d. Replace clutch cover attaching hardware.
(1) Replace hexagon head capscrew (23) and plain hexagon nut (22).
(2) Replace spring (28) and capscrew (27).
(3) Replace ring spacer (25).
(4) Replace assembled washer/screws (26).
e. Screw check valve (24) into clutch cover (30).
421
|
||
|
||
