| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-3
Table 2-1. Preventive Maintenance Checks and Services
D-Daily
M-Monthly
Q-Quarterly
A-Annually
B-Biennially
E-Every 1600 Operating Hours
Item
Interval
Items To Be
No.
DM
Q
A
B
E
Inspected/Serviced
Procedures
11
General (exterior)-
Clean the exterior of the generator housing and
CONT
continued
terminal box. Use a rag or soft nonmetallic brush
(Items 4 and 5, Appendix C) or vacuum cleaner.
12
Voltage Regulator
Clean dust from electrical terminals and casing
on voltage regulator. Use a soft bristle nonmetal
lic brush or vacuum cleaner.
Secure all leads to regulator after cleaning.
13
Fuel Filters
Remove the fuel filters by turning them counter
*
clockwise with a filter wrench.
Clean the filter head gasket surface with a lint
free cloth.
Apply a light film of clean engine oil to the
gasket surface on the filter.
Fill the new filters with clean fuel.
Install the new filters on the filter head.
a.
Hand tighten the filter until it con-
tacts the filter head surface.
b.
Hand tighten an additional one-half to three-
quarter turn.
14
Generator Terminal Box
Clean dust from electrical terminals and blocks
inside of the terminal box. Use a soft bristle
nonmetallic brush and/or vacuum cleaner. Secure all
leads to terminal blocks after cleaning.
* or every 250 operating hours
2-13
|
||
|
||
