| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-3
(h)
One pair of valves and one injector are adjusted at each pulley index mark before rotating
the accessory drive to the next index mark.
(i)
Two crankshaft revolutions are required to adjust all the valves and the injectors.
(3)
Injector Adjustment, Dial Indicator Method (Nonstop Injector Only).
(a)
Rotate the accessory drive clockwise until the "A" valve set mark on the accessory drive
pulley is aligned with the point on the gear cover (Figure 2-31).
(b)
Check the valve rocker levers on cylinder No. 5 to see if both valves are closed.
FIGURE 2-31. Aligning Pulley and Gear Pointer.
2-118
|
||
|
||
