| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-3
WARNING
Because the flywheel weighs more than 50 lb (23 kg), two soldiers or a hoist will
be required to lift the flywheel to avoid personal injury.
(6)
Remove the flywheel (9, Figure 3-62). Spur gear (8) will remain on the flywheel.
b.
Remove the flywheel housing (5) as follows:
(1)
Before removing the housing, unplug the electrical connection of the magnetic pickup (12),
loosen the locknut and unscrew the magnetic pickup (12) from the housing (5).
(2)
Loosen the oil pan mounting capscrews four to five turns.
(3)
Remove the four oil pan mounting capscrews (1, Figure 3-64) that secure the oil pan to the
rear cover.
FIGURE 3-63.
Removing Flywheel.
FIGURE 3-64.
Rear Cover.
CAUTION
Use extreme care when releasing the oil pan gasket from the rear cover to
prevent damage to the gasket. If the gasket is damaged, the oil pan must be
removed and the gasket replaced (paragraph 3-21).
(4)
Insert a feeler gauge (2, Figure 3-64) between the rear cover and theoil pan gasket. Move
the feeler gauge or the shim stock back and forth to release the gasket from the rear cover.
(5)
Remove the capscrews from the rear cover, and remove the cover from the crankshaft
flange (Figure 3-65).
3-114
|
||
|
||
