| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-5
CAUTION
Do not use any kind of lubricant to install the seal. The oil seal must be installed with
the lip of the seal and seal wear area of the accessory drive pulley clean and dry. Use
of lubricant will result in oil leakage at the seal.
k.
Install the accessory drive pulley:
(1)
Apply a film of Lubriplate 105 or equivalent to the accessory drive shaft.
(2)
Align the keyway in the pulley (14, FIGURE 3-40) with the dowel pin (13) in the shaft
(4). Use your hand to push the pulley (14) part way on the shaft (4).
(3)
Install the washer (11) and the retaining nut (12) on the accessory drive shaft (4).
Tighten the nut to 310 ft-lb torque.
l.
Install the fuel pump (paragraph 2-33).
m.
Install the water pump belt (paragraph 2-29).
n.
Run the engine'(TM 55-1905-223-10) and check for leaks.
3-68
|
||
|
||
