| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-242-14
OPERATOR MAINTENANCE
FOR LANDING CRAFT, MECHANIZED (LCM-8) (ALL VESSELS WITH MOD 2 APPLICATION)
FUEL FILTER/WATER SEPARATOR, SERVICE/REPLACE
INITIAL SETUP:
Materials/Parts (continued):
Tools and Special Tools:
Goggles, Industrial, No Vents (Item 4, Table 2,
Tool Kit, Mechanic's Rail and Marine (Item 1,
Table 1, WP 0230 00)
Rag, Wiping (Item 5, Table 2, WP 0230 00)
Suitable Drain Pan
Sealant, Tape, Antiseizing (Item 14, Table 2, WP 0230 00)
Equipment Condition:
Clean Diesel Fuel
Packing, Preformed (p/n 11350, qty 1)
Propulsion engines and diesel generator secured,
Gasket (p/n 11007, qty 2)
locked out and tagged out IAW FM 55-502
Filter Element (p/n 2020SM, qty 1)
Personnel Required:
Filter Element (p/n R12S, qty 1)
O-Ring (p/n RK11341, qty 1)
One Watercraft Engineer, 88L
Gasket (p/n RK10012, qty 1)
Materials/Parts:
References:
Cleaning Solvent MIL-PRF-680 (Item 2, Table 2,
FM 55-502
TM 55-1905-242-24P (WP 0026)
Gloves, Chemical Protective (Item 3, Table 2,
SERVICE--PROPULSION ENGINE FUEL FILTER/WATER SEPARATOR
WARNING
Cleaning solvent and diesel fuel are flammable and their vapors are potentially explo-
sive. Do not use cleaning solvent or diesel fuel in the vicinity of spark, open flame, or
excessive heat. Do not use cleaning solvent or diesel fuel in unventilated spaces. Failure
to comply can result in serious injury or death.
Do not allow diesel fuel or cleaning solvents to come in contact with unprotected skin or
eyes. Prolonged skin contact can cause illness or injury. Eye contact can cause serious
injury. Always wear chemical protective gloves and goggles when handling diesel fuel
and cleaning solvents. Failure to comply can result in illness, serious injury or death.
1.
CLOSE the fuel supply valve upstream of the fuel filter/water separator that will be serviced.
2.
Don chemical protective gloves and goggles.
3.
Position a suitable drain pan beneath the fuel filter/water separator.
4.
Remove the "T" handle (1) and the cover (2). Discard the preformed packing (3) and the gasket (4).
0058 00-1
|
||
|
||
