| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-242-14
0058 00
SERVICE--PROPULSION ENGINE FUEL FILTER/WATER SEPARATOR (continued)
5.
Grasp the molded handle on top of the filter element (5) and remove it from the cylinder (6) by slowly twisting and pulling
upward.
6.
Remove the drain valve (7) and O-ring (8) from the bowl (9). Discard the O-ring.
7.
Flush the cylinder (6) and bowl (9) with clean diesel fuel.
8.
If contamination is still present in the bowl (9) after flushing, remove the bowl retaining screws (10) and remove the
retaining ring (11) and gasket (4) from the cylinder (6). Discard the gasket.
9.
Remove the bowl (9) and clean it with cleaning solvent. Dry the bowl with clean wiping rags.
10. Install a new gasket (4) to the bowl (9) and attach the bowl to the cylinder (6) with the retaining ring (11) and bowl
retaining screws (10).
4
5
6
1
3
2
4
9
11
8
10
7
11. Replace the drain valve (7) using a new O-ring (8).
12. Install a new filter element (5) into the cylinder (6) using a twisting, downward motion.
13. Prime the fuel filter/water separator by filling it with clean diesel fuel.
14. Install the cover (2) using a new gasket (4). Secure the cover (2) using the T-handle (1) and new preformed packing (3).
15. OPEN the fuel supply valve CLOSED in step 1 of Service--Propulsion Engine Fuel Filter/Water Separator.
16. Remove the lockouts and tagouts and run the propulsion engine, checking for fuel leaks.
17. If no leakage is detected, secure the engine and dispose of the used diesel fuel, cleaning solvent, and contaminated
materials in accordance with local regulations.
0058 00-2
|
||
|
||
