| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-242-14
0084 00
REMOVAL (continued)
2.
To disconnect the clutch cable and articulator from the local control unit in the engine room:
a.
Remove the nut (10) and lockwasher (11) that secure the cable connector (12) to the local control unit (16).
b.
Loosen the locknut (13) and remove the cable connector (12) from the articulator (14).
c.
Remove the clamping bolt (15) from the local control unit (16).
d.
Loosen the locknuts (17 and 18) and remove the cable adapter bushing (19) from the articulator (14) and clutch cable
(20).
e.
Follow the length of the clutch cable (20) and disconnect it from the vessel structure. Pull the cable down from the
pilothouse.
3.
To disconnect the transmission control rod assembly from the control unit:
a.
Measure and record the length from center to center of the rod ends (21) before removing the transmission control
rod.
b.
Remove the nuts (22) and lockwashers (23) that secure the rod ends (21).
c.
Remove the rod ends (21) from the local control unit (16) and the transmission shift lever (24).
NOTE
Do not further disassemble the transmission control rod unless replacement of one or
more of its component parts is required.
d.
Hold the coupling tube (25) and loosen the locknuts (26) to permit removal of the connecting rods (27) and rod ends
(21), if required.
20
18
19
15
21
26
16
27
17
25
27
14
26
23
22
21
13
10
11
12
24
23
22
0084 00-2
|
||
|
||
