| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-242-14
DIRECT SUPPORT MAINTENANCE
FOR LANDING CRAFT, MECHANIZED (LCM-8) (ALL VESSELS WITH MOD 2 APPLICATION)
STANCHIONS AND LIFELINES, REPLACE/REPAIR
INITIAL SETUP:
Tools and Special Tools:
Personnel Required:
Tool Kit, Mechanic's Rail and Marine (Item 1,
Two Watercraft Engineers, 88L
Table 1, WP 0230 00)
References:
TM 55-1905-242-24P (WP 0002)
REPAIR
Repair of the stanchions and lifelines is accomplished by replacing the defective components. The replacement procedure
follows.
REMOVAL
1.
Loosen the turnbuckle (1) to relieve tension on the lifeline (2).
NOTE
Cotter pins, lockwashers, locking nuts, and similar locking devices shall be discarded after removal and replaced with
new cotter pins, lockwashers, locking nuts and similar locking devices.
2.
Remove the cotter pins (3) that secure the turnbuckle pins (4). Remove the turnbuckle (1) and turnbuckle pins (4).
3.
Remove the shackle (5) and the lifeline (2) from the stanchion (6).
4.
Remove the cotter pins (7) that secure the brace pins (8). Remove the brace pins (8) and brace (9).
5.
Remove the cotter pin (10) that secures the stanchion pin (11).
6.
Remove the stanchion pin (11) and remove the stanchion (6) from its socket (12).
0162 00-1
|
||
|
||
