| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-242-14
0189 00
REMOVAL (continued)
5.
Remove the circlip (5) and pin (6) from the cylinder clevis (7).
6.
Remove the bolts (8), lockwashers (9), and nuts (10) that secure the cylinder (11) to the mount. Remove the cylinder.
INSTALLATION
1.
Position the cylinder (11) on its mount and secure it with the bolts (8), lockwashers (9), and nuts (10).
2.
Install the pin (6) through the cylinder clevis (7) and ramp latch (12). Secure the pin (6) with the circlip (5).
3.
Install the hydraulic line (3) to the elbow (4).
4.
Position the protective cover (2) on the cargo well and secure it with the bolts (1).
5.
Remove the lockouts and tagouts and check the operation of the system, ensuring that the cylinder (11) operates
properly and that no leaks are present.
6.
Check the hydraulic fluid level in the reservoir and replenish as required.
7.
Dispose of used hydraulic fluid and contaminated materials in accordance with local regulations.
END OF WORK PACKAGE
0189 00-2
|
||
|
||
