| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-242-14
DIRECT SUPPORT MAINTENANCE
FOR LANDING CRAFT, MECHANIZED (LCM-8) (ALL VESSELS WITH MOD 2 APPLICATION)
RAMP WINCH HYDRAULIC MOTOR, REPLACE/REPAIR
INITIAL SETUP:
Tools and Special Tools:
Materials/Parts (continued):
Tool Kit, Mechanic's Rail and Marine (Item 1,
Rag, Wiping (Item 5, Table 2, WP 0230 00)
Table 1, WP 0230 00)
Sealant (Tape, Antiseizing) (Item 14, Table 2, WP 0230 00)
Wrench, Torque, 1/2" Drive, 0-200 lb-ft
Grease (Item 21, Table 2, WP 0230 00)
(Item 12, Table 1, WP 0230 00)
Packing (p/n 50392, qty 12)
Suitable Drain Pan
O-Ring (p/n 22666, qty 1)
Packing, Preformed (p/n 21040, qty 1)
Equipment Condition:
Retainer, Packing (p/n MS28782-25, qty 2)
Propulsion engines secured, locked out, and
O-Ring Shaft (p/n 50306, qty 2)
tagged out IAW FM 55-502
Seal, Pocket (p/n 50486, qty 8)
Winch removed (WP 0191 00)
Seal, Plain Encased (A22069, qty 2)
O-Ring Housing (p/n G258, qty 2)
Personnel Required:
Packing, Preformed (p/n 50337, qty 1)
Two Watercraft Engineers, 88L
Packing, Preformed (p/n G270, qty 1)
O-Ring Shaft (p/n 50588, qty 2)
Materials/Parts:
Hydraulic Fluid (Item 1, Table 2, WP 0230 00)
References:
Cleaning Solvent MIL-PRF-680 (Item 2, Table
FM 55-502
2, WP 0230 00)
TM 55-1905-242-24P (0094)
Gloves, Chemical Protective (Item 3, Table 2,
Goggles, Industrial, No Vents (Item 4, Table 2,
REMOVAL
WARNING
Cleaning solvent is flammable and its vapor is potentially explosive. Do not use clean-
ing solvent in the vicinity of spark, open flame, or excessive heat. Do not use cleaning
solvent in unventilated spaces. Failure to comply can result in serious injury or death.
Do not allow hydraulic fluid or cleaning solvent to come in contact with unprotected
skin or eyes. Prolonged skin contact can cause illness or injury. Eye contact can cause
serious injury. Always wear chemical protective gloves and goggles when handling
used hydraulic fluid and cleaning solvent. Failure to comply can result in illness, seri-
ous injury, or death.
0190 00-1
|
||
|
||
