| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-242-14
GENERAL SUPPORT MAINTENANCE
FOR LANDING CRAFT, MECHANIZED (LCM-8) (ALL VESSELS WITH MOD 2 APPLICATION)
ACCUMULATOR, REPAIR
INITIAL SETUP:
Tools and Special Tools:
Materials/Parts:
Tool Kit, Mechanic's Rail and Marine (Item 1,
Hydraulic Fluid (Item 1, Table 2, WP 0230 00)
Table 1, WP 0230 00)
Cleaning Solvent MIL-PRF-680 (Item 2, Table 2,
Vise (Item 3, Table 1, WP 0230 00)
Wrench, Torque, 1/2 in. Drive, 0-200 lb-ft
Gloves, Chemical Protective (Item 3, Table 2, WP 0230 00)
(Item 12, Table 1, WP 0230 00)
Goggles, Industrial, No Vents (Item 4, Table 2,
Hose Assembly, Accumulator Charging
(Item 14, Table 1, WP 0230 00)
Rag, Wiping (Item 5, Table 2, WP 0230 00)
Gauge Assembly, Accumulator (Item 15,
Grease (Item 21, Table 2, WP 0230 00)
Table 1, WP 0230 00)
Nitrogen Gas (Item 24, Table 2, WP 0230 00)
Drop Light, Extension (Item 16, Table 1,
Gasket (p/n GA100117, qty 2)
Packing, Preformed (p/n 203524, qty 8)
Air Compressor (Item 17, Table 1, WP 0230 00)
Packing, Preformed (p/n RG100155, qty 8)
Packing, Preformed (p/n GA100475, qty 2)
Equipment Condition:
Accumulator removed (WP 0087 00)
References:
FM 55-502
Personnel Required:
TM 55-1905-242-24P (WP 0015)
Two Watercraft Engineers, 88L
DISASSEMBLY
WARNING
Cleaning solvent is flammable and its vapor is potentially explosive. Do not use clean-
ing solvent in the vicinity of spark, open flame, or excessive heat. Do not use cleaning
solvent in unventilated spaces. Failure to comply can result in serious injury or death.
Do not allow hydraulic fluid or cleaning solvent to come in contact with unprotected
skin or eyes. Prolonged skin contact can cause illness or injury. Eye contact can cause
serious injury. Always wear chemical protective gloves and goggles when handling
used hydraulic fluid and cleaning solvent. Failure to comply can result in illness, seri-
ous injury, or death.
1.
Don chemical protective gloves and goggles.
2.
Remove the protective cap (1) and loosen the air valve (2) until the nitrogen gas escapes.
3.
Remove the air valve assembly (3) and air valve gasket (4).
4.
Remove the fusible plug (5) and gasket (6).
0196 00-1
|
||
|
||
