Custom Search
 
  
 
TM 55-1925-204-12
when the pistons uncover the exhaust ports. The gases enter
(d) Discard old gaskets and replace with new
the water cooled manifold, flows out through the exhaust outlet
ones.
fitting into the silencer, then out to the atmosphere.
(3)  Installation. Refer to figure 4-4 and paragraph
b. Cleaning, Inspection, and Repair. The exhaust system
4-13 b. (4) and install the air receiver by reversing the removal
requires  periodic  inspection  and  cleaning  by  removing
procedures.
accumulations of carbon. The procedure follows:
(1)  Exhaust manifold.
4-15. Exhaust System
(a) Drain the engine cooling system.
a. General.
The  exhaust  system  conducts  the
(b) Remove hand hole covers (fig. 4-8) for
combustion  gases  from  cylinder  exhaust  ports  to  the
access to all exhaust ports.
atmosphere. The combustion gases flow out of the cylinders
4-16

 


Privacy Statement - Copyright Information. - Contact Us

 Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business