| Tweet |
Custom Search
|
|
|
||
 TM 5-2010-205-14
4-12. REPAIR ENGINE ASSEMBLY
This Task Covers: a. Inspect b. Service c. Repair
_____________
INITIAL SETUP
Tools Required
Equipment Conditions
Tool Kit, General
Engine Shutdown (para 2-11).
Mechanics (Appendix B,
Battery Disconnected (para 4-58).
Item 1)
Materials/Parts Required
Personnel Required
Cotton Rags (Appendix E,
1 person
Item 3)
________
INSPECT (Figure 4-2.)
1. Inspect for leaks. If leaking is observed, notify supervisor.
2. Inspect for loose bolts, worn belts and debris.
________
SERVICE
NOTE
As the air cleaner (2) element becomes plugged, the
difference of air pressure between the inlet side (dirty
side) will increase. The primary element can be cleaned
up to six times before replacement. The element, when
cleaned, should be thoroughly checked for rips or tears
in the filter material.
1. Service air cleaner when indicator (1) turns red.
2. Clean air cleaner with water.
WARNING
To prevent burns and to prevent damage to the engine,
do not add coolant to an overheated engine. Allow the
engine to cool first.
4-15
|
||
|
||
