| Tweet |
Custom Search
|
|
|
||
 TM 5-2010-205-14
4-40.
REPLACE MANIFOLD ASSEMBLY
This Task Covers:
a. Inspect
b. Replacement
INITIAL SETUP
Tools Required
Equipment Conditions
Tool Kit, General Mechanics
Engine Shutdown (para 2-11).
(Appendix B, Item 1)
Battery Disconnected (para 4-58).
Air Filter Removed (para 4-49).
Materials/Parts Required
PCV Lines Removed (para 4-33).
Fuel Injection Lines Removed
Cotton Rags (Appendix E, Item 3)
Lubricating Oil (Appendix E,
Item 2)
Personnel Required
Masking Tape (Appendix E,
Item 7)
1 Person
Gasket P/N 7C0939
Manifold P/N 8N1298
INSPECT
1.
Inspect for loose bolts (6) through (13).
2.
Inspect for loose pipe plug (1).
3.
Inspect for cracks.
REPLACEMENT
1.
Loosen and remove bolts (6) through (13) and washers (3).
2.
Remove manifold (4) from block (2).
3.
Remove gaskets (5).
4.
Install new gaskets (5).
5.
Install manifold.
CAUTION
Not following the bolt tightening sequence will result in air system leaks.
4-63
|
||
|
||
