TM 5-3990-264-13&P
FIELD MAINTENANCE
LUBRICATION INSTRUCTIONS
INITIAL SETUP:
References (cont.)
Materials/Parts
Lubricating Oil OE/HDO 10
FM 9-207 (WP 0042)
(WP 0046, Table 1, Item 11, 12, 13)
Lubricating Oil OE/HDO 30
(WP 0046, Table 1, Item 14, 15, 16)
References
DA Pam 750-8 (WP 0042)
GENERAL
NOTE
These lubrication instructions to be performed on the IBC are MANDATORY.
This work package contains lubrication instructions for the Improved Boat Cradle (IBC).
The IBC must receive lubrication with approved lubricants at recommended intervals in order to be mission ready
at all times. Refer to Table 2.
Table 2 lists lubricants to be used in all temperature ranges and shows the intervals.
The Lubrication Chart shows lubrication points, names to be lubricated, the required lubricant, and recommended
intervals for lubrication. Any special lubricating instructions required for specific components are contained in the
NOTES section of the chart.
Recommended intervals are based on normal conditions of operation, temperature, and humidity. When operating
under extreme conditions, lubricants should always be changed more frequently. When in doubt, notify your
supervisor.
INTERVALS
Table 1.
Interval and Man Hours.
Interval
Man-Hours*
S-Semiannual
0.5
*The man-hour time specified is the time you need to do all the services prescribed.
SPECIFIC LUBRICATION INSTRUCTIONS
Keep all lubricants in a closed container and store in a clean, dry place away from extreme heat. Keep
container covers clean and do not allow dust, dirt, or other foreign material to mix with lubricants. Keep all
lubrication equipment clean and ready for use.
Maintain a record of lubrication performed and report any problems noted during lubrication. Refer to DA
Pam 750-8 (WP 0042) for maintenance forms and procedures to record and report any findings.
Refer to FM 9-207 (WP 0042) for lubrication instructions in cold weather.
03/15/2011Rel(1.8)root(lubewp)wpno(M06022)