FIREFIGHTING AND BALLAST SYSTEM PIPING, VALVES, STRAINERS, HOSES, AND FITTINGS, REPLACE

Custom Search

HAND PUMP, REPLACE

TM-55-1905-242-14 Landing Craft Mechanized (LCM-8) (All Vessels with Mod 2 Applications) (ROHR Models) NSN 1905-01-465-7599 (EIC DWD) Manual

INSTALLATION--STRAINER

TM 55-1905-242-14

0144 00

UNIT MAINTENANCE

FOR LANDING CRAFT, MECHANIZED (LCM-8) (ALL VESSELS WITH MOD 2 APPLICATION)

FIREFIGHTING AND BALLAST SYSTEM PIPING, VALVES, STRAINERS, HOSES, AND FITTINGS,

REPLACE

INITIAL SETUP:

Personnel Required:

Tools and Special Tools:

Two Watercraft Engineers, 88L

Tool Kit, Mechanic's Rail and Marine

(Item 1, Table 1, WP 0230 00)

References:

Equipment Condition:

FM 55-502

Diesel generator secured, locked out, and

TM 55-1905-242-24P (WP 0069)

tagged out IAW FM 55-502

Fire pump seacock CLOSED, locked out, and

tagged out IAW FM 55-502

REMOVAL--STRAINER

NOTE

Cotter pins, lockwashers, locking nuts, and similar locking devices shall be discarded after removal and replaced with

new cotter pins, lockwashers, locking nuts and similar locking devices.

Remove the bolts (1), flat washers (2), lockwashers (3), and nuts (4) that secure the strainer (5) to the seacock (6) and to

the piping (7).

Remove the strainer (5) and gaskets (8).

If the strainer will be removed for an extended period of time, install an appropriate blanking plate over the seacock flange

to prevent inadvertent flooding of the vessel.

0144 00-1