TM 5-3990-264-13&P
0012
OPERATION IN MUD AND SNOW
1.
Immediately after operation in mud or snow, thoroughly clean, inspect, and lubricate if tactical situation permits.
Refer to (WP 0034) for proper lubrication instructions.
2.
Inspect, clean, and lubricate frequently when operating in mud. Refer to (WP 0034) proper lubrication
instructions.
END OF TASK
OPERATION IN DUSTY OR SANDY AREAS
1.
Inspect, clean, and lubricate frequently when operating in dusty or sandy areas. Refer to (WP 0034) for proper
lubrication instructions.
2.
Ensure no dust or sand enters exposed mechanisms during inspections and repair operations. Cover exposed
parts with tarpaulins or other suitable cover during disassembly and assembly.
3.
When beginning operations in dusty or sandy areas, remove lubricants from exposed components if tactical
situation permits. Grease and oil will cause dust and sand to accumulate and act as an abrasive, which will
cause rapid wear.
END OF TASK
END OF WORK PACKAGE
0012-2
03/15/2011Rel(1.8)root(opunuwp)wpno(O04009)
