TM 5-3990-264-13&P
0011
OPERATION - Continued
WARNING
Never drive with NO TRANSIT light illuminated. An illuminated light means LHS is not fully
stowed. The load could break loose. Failure to comply may result in serious injury or death
to personnel.
NOTE
Overload warning light will come on when hook arm cylinder are fully retracted.
18.
Hold joystick (Figure 4, Item 10) in LOAD until hook arm cylinders are fully retracted.
CAUTION
Engine speed must be at idle prior to using LHS MODE SELECT switch. Failure to comply
may result in damage to equipment.
NOTE
LHS MODE SELECT switch must remain in MAN TRANS while vehicle is traveling. Turn LHS
MODE SELECT switch to MAN TRANS .
19.
Turn LHS MODE SELECT switch (Figure 4, Item 9) to MAN TRANS.
NOTE
If locks do not engage, raise IBC slightly and lower again. IBC should seat completely.
20.
Inspect IBC frame (Figure 5, Item 20) to ensure two IBC locking tabs (Figure 5, Item 21) are engaged in vehicle
frame (Figure 5, Item 22).
20
22
21
Figure 5. Check Lock Tabs.
END OF TASK
END OF WORK PACKAGE
03/15/2011Rel(1.8)root(opusualwp)wpno(O04008)