TM 5-3990-264-13&P
0026
DISASSEMBLY - Continued
8
8
3
10
9
9
5
5
4
7
7
6
6
2
4
2
1
1
Figure 2.
Rear roller Disassembly.
2.
Remove two rollers (Figure 2, Item 4) from roller arm (Figure 2, Item 3).
3.
Remove two washers (Figure 2, Item 5) from roller arm (Figure 2, Item 3).
NOTE
Perform Step (4) only if rollers are damaged.
4.
Repeat Steps (1) through (3) if remaining sets of rollers are damaged.
5.
Remove four nuts (Figure 2, Item 6) and lockwashers (Figure 2, Item 7) from two loop clamps (Figure 2, Item
8). Discard lockwashers.
6.
Remove two loop clamps (Figure 2, Item 8), saddle blocks (Figure 2, Item 9), and roller arm (Figure 2, Item 3)
from roller holder (Figure 2, Item 10).
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M06010)