TM 5-3990-264-13&P
0026
ASSEMBLY - Continued
3.
Install two washers (Figure 3, Item 5) on roller arm (Figure 3, Item 3).
4.
Install two rollers (Figure 3, Item 4) on roller arm (Figure 3, Item 3).
5.
Install two washers (Figure 3, Item 2) on roller arm (Figure 3, Item 3) with two cotter pins (Figure 3, Item 1).
6.
Repeat Steps (3) through (5) if remaining sets of rollers are damaged.
END OF TASK
INSTALLATION
NOTE
Both left and right rear roller assemblies are replaced the same way. Left side is shown.
Heavy end of roller holder faces inboard.
Install roller holder (Figure 4, Item 6) on IBC frame (Figure 4, Item 7) with capscrew (Figure 4, Item 1), two
washers (Figure 4, Item 2), two thrust washers (Figure 4, Item 5), lockwasher (Figure 4, Item 3), and locknut
(Figure 4, Item 4).
0026-5
03/15/2011Rel(1.8)root(maintwp)wpno(M06010)