TM 5-3990-264-13&P
0025
DISASSEMBLY - Continued
3.
Using a suitable cutting device, remove straight pin (Figure 1, Item 4) from longest wire rope (Figure 1, Item
5).
4.
Using a suitable cutting device, remove longest wire rope (Figure 1, Item 5) from turnbuckle jaw (Figure 1, Item
3). Discard wire rope (Figure 1, Item 5).
END OF TASK
CLEANING
Refer to General Maintenance Instructions (WP 0017) for general cleaning instructions.
END OF TASK
INSPECTION
Refer to General Maintenance Instructions (WP 0017) for general inspection instructions.
END OF TASK
ASSEMBLY
NOTE
Both the front (shortest) and rear (longest) tie-down cables are assembled the same way.
Front tie-down cable is shown.
1.
Manufacture longest wire rope (Figure 2, Item 5) and install on straight pin (Figure 2, Item 4) and turnbuckle
jaw (Figure 2, Item 3) per (WP 0035). Finished wire rope length is 6 inches (15 cm).
4
5
3
2
1
Figure 2. Cable Assembly.
03/15/2011Rel(1.8)root(maintwp)wpno(M06009)
