TM 5-3990-264-13&P
FIELD MAINTENANCE
LOAD BINDER CABLE ASSEMBLY REPAIR
INITIAL SETUP:
References
Tools and Special Tools
Tool Kit, General Mechanic's: Automotive
(WP 0044, Table 2, Item 2)
Parts Manual (WP 0039, Figure 10)
Materials/Parts
Equipment Condition
Load binder cable assembly removed.
Latch Kit, Hook (WP 0047, Table 1, Item 1)
Pin, Cotter (WP 0047, Table 1, Item 8)
Pin, Cotter (WP 0047, Table 1, Item 9)
DISASSEMBLY
NOTE
Perform Step (1) only if eye hook latch is damaged.
Locknut, latch bolt, spring, and latch are all part of the hook latch kit.
1.
Remove locknut (Figure 1, Item 1), latch bolt (Figure 1, Item 2), spring (Figure 1, Item 3), and latch (Figure 1,
Item 4) from eye hook (Figure 1, Item 5). Discard hook latch kit.
5
10
9
8
11
7
1
5
6
4
3
2
Figure 1.
Binder Cable Disassembly.
2.
Remove two cotter pins (Figure 1, Items 6 and 7) from double clevis (Figure 1, Item 8). Discard cotter pins.
3.
Remove two double clevis pins (Figure 1, Items 9 and 10) and double clevis (Figure 1, Item 8) from load binder
(Figure 1, Item 11) and eye hook (Figure 1, Item 5).
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M06008)
