TM 5-3990-264-13&P
FIELD MAINTENANCE
MANUFACTURED ITEMS PROCEDURES
INITIAL SETUP:
References (cont.)
Tools and Special Tools
Tool Kit, General Mechanic's: Automotive
Parts Manual (WP 0039, Figure 3)
(WP 0044, Table 2, Item 2)
Parts Manual (WP 0039, Figure 5)
Crimping Tool, Terminal, Hand, Weatherpack
Parts Manual (WP 0039, Figure 8)
(WP 0044, Table 2, Item 1)
Vise Grip, 10", Straight Jaw
(WP 0044, Table 2, Item 1)
Materials/Parts
Polyurethane Coating (WP 0046, Table 1, Item 4)
References
Parts Manual (WP 0039, Figure 1)
STANCHION PIN ASSEMBLY WIRE ROPE
The stanchion pin assembly is used in 4 places. One strandwire is 4 inches (10.16 cm) longer than the other on
each pin assembly. Crimped swaging sleeves are used to attach the strand wire to other components. Each
application requires two swaging sleeves.
CUTTING LENGTH
16 7/8 INCHES LONG (42.86 cm)
FINISHED LENGTH
16 INCHES LONG (40.64 cm)
CUTTING LENGTH
12 7/8 INCHES LONG (32.70 cm)
FINISHED LENGTH
12 INCHES LONG (30.48 cm)
STRAND WIRE
SWAGING
MS83420/4-010
1/4 Inch (.63 cm)
SLEEVE
RS290-1
Figure 1. Stanchion Pin Assembly Wire Rope.
03/15/2011Rel(1.8)root(manuwp)wpno(M06016)