TM 5-3990-264-13&P
0010
OPERATION - Continued
CAUTION
Do not use R (reverse) to back up vehicle while hook arm is attached to IBC. Failure to comply
may result in damage to equipment.
NOTE
If IBC rollers do not make contact with trailer stop, perform Steps (14) through (17). If rollers
make contact with stop, proceed to Step (18).
16.
Turn LHS MODE SELECT switch (Figure 5, Item 7) to MAN HOOK ARM.
17.
Move joystick (Figure 5, Item 10) to LOAD until front of IBC is raised approximately 12 to 18 inches (30.48-45.72
cm) above trailer deck height.
CAUTION
Engine speed must be at idle prior to using LHS MODE SELECT switch. Failure to comply
may result in damage to equipment.
18.
Turn the LHS MODE SELECT switch (Figure 6, Item 7) to MAN MAIN FRAME.
0010-7
03/15/2011Rel(1.8)root(opusualwp)wpno(O04007)