TM 5-3990-264-13&P
FIELD MAINTENANCE
FRONT CONTACT GUIDE PAD ASSEMBLY REPLACEMENT
INITIAL SETUP:
Materials/Parts (cont.)
Tools and Special Tools
Tool Kit, General Mechanic's: Automotive
Lockwasher (WP 0047, Table 1, Item 16) Qty: 1
(WP 0044, Table 2, Item 2)
Lockwasher (WP 0047, Table 1, Item 3) Qty: 8
Ratchet, 10 5/16" Long, 1/2" DR.
(WP 0044, Table 2, Item 1)
References
Socket, Deep Well, 12 PT, 1 1/2", 1/2" DR.
Parts Manual (WP 0039, Figure 7)
(WP 0044, Table 2, Item 1)
Socket Driver, 1/2" DR., HEX, 1/2"
(WP 0044, Table 2, Item 1)
Wrench, Combination, Standard Length, 12 PT,
Equipment Condition
1-1/2" (WP 0044, Table 2, Item 1)
Bridge erection boat removed from IBC.
Wrench Impact, Pneumatic, 1/2" DR, (50-700 FT
LBS) (WP 0044, Table 2, Item 1)
Materials/Parts
Locknut (WP 0047, Table 1, Item 7) Qty: 2
REMOVAL
NOTE
Left and right front guide pad assemblies are removed the same way. Left side shown.
One bracket is threaded. Note position of bracket prior to removal to ensure proper
installation.
1.
Remove locknut (Figure 1, Item 1), screw (Figure 1, Item 2), and two washers (Figure 1, Item 3) from bracket
(Figure 1, Item 4) and IBC (Figure 1, Item 5). Discard locknut.
0030-1
03/15/2011Rel(1.8)root(maintwp)wpno(M06018)