TM 5-3990-264-13&P
FIELD MAINTENANCE
REMOVABLE SKID PLATE REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
Equipment Condition
Tool Kit, General Mechanic's: Automotive
IBC on vehicle (WP 0004), IBC on PLS trailer
(WP 0044, Table 2, Item 2)
(WP 0008), or IBC on level ground
Personnel Required
(3)
References
Parts Manual (WP 0039, Figure 3)
REMOVAL
WARNING
Removable skid plate weighs 100 lbs. (45.4 kg). Remove and replace pipe plug to ensure all
water is drained from removable skid plate. It must be supported while removing ring pins,
and requires three personnel to remove and replace. Failure to comply may result in serious
injury or death to personnel.
NOTE
Perform Steps (1) through (3) if removable skid plate is installed in operational position.
Perform Step (4) if removable skid plate is installed in stowage position.
1.
Remove pipe plug (Figure 1, Item 1) and drain any accumulated water from removable skid plate (Figure 1,
Item 2). Install pipe plug (Figure 1, Item 1) in removable skid plate (Figure 1, Item 2).
0018-1
03/15/2011Rel(1.8)root(maintwp)wpno(M06002)