TM 5-3990-264-13&P
0018
INSTALLATION
WARNING
Removable skid plate weighs 100 lbs. (45.4 kg). Remove and replace pipe plug to ensure all
water is drained from removable skid plate. It must be supported while removing ring pins,
and requires three personnel to remove and replace. Failure to comply may result in serious
injury or death to personnel.
NOTE
Perform Step (1) if removable skid plate is to be installed in operational position. Perform
Steps (2) through (4) if being installed in stowage position.
1.
With the aid of two assistants, position removable skid plate (Figure 3, Item 2) right side up on rear IBC (Figure
3, Item 6). Slide removable skid plate (Figure 3, Item 2) forward until ring pin brackets (Figure 3, Item 4) are
aligned with frame (Figure 3, Item 5). Secure with two ring pins (Figure 3, Item 3).
6
5
4
2
1
3
Figure 3. Operational Position.
03/15/2011Rel(1.8)root(maintwp)wpno(M06002)
