TM 5-3990-264-13&P
0020
INSTALLATION
NOTE
Both the front (shortest) and rear (longest) tie-down cables are installed the same way. Front
tie-down cable is shown.
1.
Install front tie-down cable assembly (Figure 2, Item 7) on bridge erection boat.
1
2
7
4
5
3
6
Figure 2.
Tie Down Cable Installation.
2.
Turn handle (Figure 2, Item 1) until turnbuckle jaw (Figure 2, Item 5) is aligned with IBC frame (Figure 2, Item
6).
3.
Install pin (Figure 2, Item 3) in turnbuckle jaw (Figure 2, Item 5) and IBC frame (Figure 2, Item 6).
4.
Install ring pin (Figure 2, Item 4) in pin (Figure 2, Item 3).
5.
Tighten turnbuckle (Figure 2, Item 2) until there is no longer any slack in front tie-down cable assembly (Figure
2, Item 7).
END OF TASK
END OF WORK PACKAGE
03/15/2011Rel(1.8)root(maintwp)wpno(M06004)
